Azimuth Stop Donut for F1. This custom aluminum piece replaces the original plastic piece at the center of the AZ rotation. Much stronger than the original part.

   Azimuth inner busing for the F1. This custom stainless steel piece replaces the original soft metal bushing at the center of the AZ rotation. Much stronger than the original piece.

   Skid plates for the F1. These custom aluminum skid/stow brackets replace the original plastic ones. Much stronger than the original piece and works correctly for height with the BOW kits. Sold in pairs.

    These is a brand NEW aluminum mounting plate for the model F1 MotoSat dish. It comes with the two side rails. Can be shipped via UPS.

   NEW F1 Azimuth Aluminum Ring Gear. It mates with the AZ motor gear to rotate the dish.

   F1 Azimuth Aluminum Ring Gear SEGMENT. Used to reinforce the ring at the stop position. ALSO, can be used to repair a ring gear.

    Anvil Custom Fly-a-way Case for the F1 or G74/5. Measures 65½x42½x25½ inches including wheels. 230 lbs. Used.

   Azimuth motor and gear assembly used on the F1 and others.

   Elevation motor and gear assembly used on the F1 and others.

   SKEW motor and gear assembly used on the F1 and others.

   F1 motor count sensor used with the Azimuth or Skew motor. Comes with 2 wire locks for easy replacement.

   F1 UCB old style that mounts behind the reflector between the 2 vertical arms, about 5"x10". 30 day warranty.

   F1 UCB new style that mounts under the base cover, about 6" square. 30 day warranty.

   F1 Blue LED assembly fits: F1/G74/G75 and TV dishes.

   Universal TV BOW kit for F1/G74/G75. Standard Definition for DirecTV or Dishnetwork. Receives one TV satellite. Includes LNB, Hughes arm and adapter bracket.

   Lipstick TV BOW kit for F1/G74/G75. Standard Definition for DirecTV or Dishnetwork with 99W (DTV) or 117W (Dish).

   DirecTV Custom High Definition Slimline TV BOW kit for F1/G74. Receives three TV satellites. Includes LNB, custom arm and adapter bracket.

   DirecTV Custom High Definition TV BOW kit (SWM model) for F1/G74. Receives three TV satellites. Includes LNB, custom arm, adapter bracket and DTV power inserter.

   NEW control cable for F1/F2/F3/G74. Length 25' with 22 awg wire. Comes with dish base cable end but not the 9 wire green controller plug (sold separately).

   NEW control cable for F1/F2/F3/G74. Length 25' with 18 awg (larger) wire. Comes with dish base cable end but not the 9 wire green controller plug (sold separately).

   TWO NEW RG-6 connectors for the base of the F1 dish. Includes a tube of silicone grease to properly water seal the joints.

   NEW RG6 coax cable for both transmit and receive. Length 25' with RG6 conector on both ends, one end is inside and the other is outside type connector. This is Black, optional White available. For custom lengths please specify length and add $1.50 a foot.

   NEW RG6 coax cable for both transmit and receive. Length 25' with RG6 conector on both ends, one end is inside and the other is outside type connector. This is White color, optional Black available. For custom lengths please specify length and add $1.50 a foot.

   MotoSat special serial cable used for the older D1 controller systems.

   RV roof sealer made by Dicor. Highly recommended for RV use. Self-Leveling Lap Sealant. Designed for use on horizontal RV roof surfaces, including rubber, TPO, metal, fiberglass, aluminum or wood.

   RV roof entry cap to seal and route wires thru the roof.

   F1 base ½ cover A (ABS white). Covers half of base.

   F1 base ½ cover B (ABS white). Covers half of base between the arms.

   F1 plastic cover C (ABS white). Covers behind the reflector between the arms.

   F1 plastic cover D (ABS white). Covers behind and above the reflector.

   F1 Elevation gear box (green unit at base between arms). Refurbished. $100 core fee, $900+100 or send in for repair/exchange.

   F1 Elevation Stop Bracket

   F1 Main Arm